During all phases of offshore construction, including foundation installation, we employ a range of protective measures to ensure no adverse impacts to marine wildlife. These measures include restricting vessel speed, limiting certain activities to specific times of year , mandatory observers onboard vessels, construction clearance zones, additional lookout vessels, and underwater acoustic monitoring. We track and record all observations of marine mammals and protected species throughout our construction activities
Installing offshore wind turbine foundations
Foundations are the structures that support offshore wind turbines in the water. There are different types of foundations such as jackets, monopiles, and even floating versions. In Formosa 1, the turbines are installed on monopile foundations. For Greater Changhua 1 and 2a we adapt jacket foundations. We will implement suction bucket jacket foundations in Greater Changhua 2b and 4.
Installing offshore wind turbines
All components for the offshore wind turbines are brought out to sea in pieces to be assembled on site. Once in position, the installation vessel lowers its four legs onto the seabed to stabilize itself. Safety is always our top priority, so we only undertake these activities in appropriate weather conditions with detailed preparation, carefully testing the stability of each component before executing the next step.
We use a crane to place the steel turbine tower onto the foundation. The nacelle and hub are then installed on top of the tower. Lastly, the blades are lifted and installed one by one by bolting them to the hub.
Installing cables and the offshore substation
The offshore substation is located out at sea within the offshore project site. The substation collects the power generated by the turbines through inter-array cables, where it then transforms the power to a higher voltage and sends it to shore through an export cable. The export cable transports the power inland from the offshore substation– a process known as making landfall. Transmitting power at a higher voltage means that less energy is lost over the long distances it must travel.
An offshore substation consists of two parts: the foundation and the topside. The foundation is installed just like an offshore wind turbine foundation. The topside is constructed and tested onshore before being transported to the site to be placed on the foundation.
The cables themselves are also tested onshore for quality and performance before being installed onsite using a cable laying vessel. The vessel places the cables on to the seabed, connecting them to each turbine via the foundations. In addition, the exact location of the cables is also thoroughly researched prior to installation, to ensure we don't impact sensitive habitats.